HP 1652B Getting Started page 74

Starting the
When you are ready to print, you will need to know whether there is
Printout
more data than is displayed on screen. In cases where data is off screen
(i.e., format specifications with all pods assigned to a single analyzer),
you need to decide whether you want all the data or just the data is on
screen.
If you want just what is on screen, start the printout with the Print
Screen option. If you want all the data, use the Print All option. Both
options are in the I/O menu.
Once you decide which option to use, start the printout by placing the
cursor on the print option (screen or all) and pressing SELECT.
I/O MENU
l
Done
0 Print Screen
l
Print All
l
Disk Operations
0 I/O Port Configuration
l
External BNC Configuration
l
Self Tests
Print
Screen
The Print Screen option prints only what is displayed on screen at the
time you initiate the printout. In the Print Screen mode, the printer
uses its graphics capabilities so the printout will look just like the logic
analyzer screen with only one exception: the cursor will not print.
-
HP 1652B/l653B
Getting Started Guide
Making Hardcopy Prints
B-5