HP 1652B Getting Started page 26

Moving Around
The two logic analyzer types and the oscilloscope each have their own
the Main Menus
set of menus. You can enter these menus and move between them by
pressing the FORMAT/CHAN, TRACE/TRIG and DISPLAY menu
keys. These keys, as shown below, are in the area labeled MENU.
01652E20
A fourth menu key labeled I/O, will bring up a pop-up menu that is
independent of the analyzer and oscilloscope settings. The I/O
functions available in this pop-up will be explained in detail in the
HP 1652BJHP 16S3B Front-Panel Operation Reference manual.
Accessing the
When you turn Analyzer 1, Analyzer 2, or Oscilloscope on from the
Main Menus System Configuration menu, you also assign their set of main menus to
the MENU keys.
--
In the following exercise, you will access the Format Specification
menus of both analyzer machines and the Channel menu of the
oscilloscope.
1. Press the FORMAT/CHAN key. One of the following main menus
will appear:
l
Scope Channel menu (if the scope is on).
l
State Format Specification menu (if the state analyzer is on).
l
Timing Format Specification menu (if the timing analyzer is on).
If, for example, the State Format Specification menu appears, but you
wanted a FORMATKHAN menu of a different machine, continue
with step 2.
2. Using the Knob, move the cursor to the analyzer Name: field
(upper left corner) and press the SELECT key. See the figure on
the following page.
HP
16528/16538
Getting to Know the Main Menus
Getting Started Guide 3-5