HP 1652B Getting Started page 48

How Do I
In order to make this timing measurement, you must configure the logic
Configure the
analyzer as a timing analyzer. By following these steps you will
- Logic Analyzer?
configure Analyzer
1
as the timing analyzer.
If you are in the System Configuration menu you are in the right place
to get started and you can start with step 2; otherwise, start with step 1.
1. Using the field in the upper left corner of the display, get the System
Configuration menu on screen.
a. Place the cursor on the field in the upper left corner of the display
and press SELECT.
b. Place the cursor on System and press SELECT.
2. In the System Configuration menu, change Analyzer 1 type to
Timing. If analyzer 1 is already a timing analyzer, go on to step 3.
-
a. Place the cursor on the Type: field and press SELECT.
b. Place the cursor on Timing and press SELECT.
System Configuration
Anelyzer 2
Type: IO'f
Unafisi !fbi finalgzer
+-,
----------------
HP 16528/1653B
Getting Started Guide
Using the Timing Analyzer
5-3