Disassembly; Adjustment Cover; Hood, Filter Piece And Lens Cove - Hitachi DZ-MV580A Service Manual

Disassembly and Reassembly > Disassembly

5-3 Disassembly

Information:
Numbers in disassembly procedure diagrams are step numbers for disassembling order, and letters
in brackets [ ] show the types of screw. Letters in brackets ( ) show the name of parts.

(1) Adjustment Cover

1) Open the LCD monitor (b).
2) Insert a fine-tipped flat-bladed screwdriver
(d) into the groove of adjustment cover (a),
and remove the adjustment cover in the
direction of the arrow, being very careful not
to scratch the adjustment cover or side
case-L (c) with screwdriver.
(2) Hood, Filter Piece and Lens Cover
1) Turn the hood (a) in the direction of the
arrow to remove it.
2) Remove three screws [A], and then remove
the filter piece (b), being careful not to
scratch the lens surface with screwdriver at
this time.
3) Remove the lens cover (c) in the direction of
the arrow.
(a) Adjustment cover
(b) LCD monitor
(c) Side case-L
(d) Flat-bladed screwdriver
(b)
1)
(d)
2)
(a) Hood
(b) Filter piece
(c) Lens cover
(b)
1)
2) [A]
(a)
[A] M1.7x4 (Black)
5 - 3
(c)
(a)
Fig. 5-3-1
(c)
3)
Fig. 5-3-2