Table of Contents
Advertisement
Troubleshooting > Messages and Troubleshooting
Message
Error has occurred.
Please reinsert a disc.
Error has occurred.
Please restart.
Error occurred.
Please replace disc or format
disc
Error occurred.
Please replace disc.
ERROR ××××
(4-digit alpha-numerals
showing the code of trouble
will appear in ××××.)
Finalize may not be
complete.
Finalize again now?
YES
NO
Found error in image file.
Repair disc now?
YES
NO
It is unrecordable on this
card.
Cause/condition for
message to appear
Appears if, when power was turned on,
the self-diagnosis function of DZ-
MV580A/MV550A detected a slight
trouble that can be fixed: See "4-5 Self-
Diagnosis Function and
Troubleshooting" for details.
Appears if, when power was turned on,
the self-diagnosis function of DZ-
MV580A/MV550A detected a slight
trouble that can be fixed by turning
power on again: See "4-5 Self-Diagnosis
Function and Troubleshooting" for
details.
Appears if repair has failed with DVD-
RAM disc after message "Data error in
all image file. Repair all data now?" or
"Found error in image file. Repair data
now?" appeared.
Appears if repair has failed with DVD-R
disc after message "Data error in all
image file. Repair all data now?" or
"Found error in image file. Repair data
now?" appeared.
Appears if the self-diagnosis function in
DZ-MV580A/MV550A detects a serious
problem during recording, or when the
same trouble occurs three times
consecutively during recording.
Appears if accident, such as power off,
occurred during finalizing, and then
power was turned on again or disc was
reloaded.
Appears if repair has failed after
message "Data error in a part of image
file. Repair disc now?" appeared.
Appears when a card other than SD
memory card or MultiMediaCard was
loaded.
4 - 18
Troubleshooting
Set the power switch to "POWER
OFF", press the DISC EJECT button,
and then reinsert the disc. After that,
set the power switch to "VIDEO" or
"PHOTO (disc)".
Set the power switch to "POWER
OFF", reconnect the AC adapter/
charger or battery, and then set the
power switch to "VIDEO" or "PHOTO
(disc)".
Initialize the disc (deleting all
recorded data), or replace the disc.
Replace the disc.
Take note of the 4-digit alpha-
numerals in ××××, and refer to "4-5
Self-Diagnosis Function and
Troubelshooting".
Choose "YES" and designate it to
finalize the disc.
Choose "YES" and designate total
repair (automatic repair) of video file.
Choosing "NO" will display a message
for verifying initialization. [Refer to
*3 on page 4-14]
Insert an SD memory card or
MultiMediaCard.
Advertisement
Table of Contents
Troubleshooting
