Setups For Adjustment; Checking Reference Data; List Of Jigs And Tools For Adjustment - Hitachi DZ-MV580A Service Manual

Adjustment > Setups for Adjustment

6-2 Setups for Adjustment

6-2-1 Checking Reference Data

Before starting adjustment, check whether it will be necessary to create the reference data or not,
referring to the flowchart below:
Have you ever performed
adjustment of this model?
Yes
Will you use the
same PC as for past
adjustment?
Yes
Will you use the same
light box as for past
adjustment?
Yes
Did you perform
maintenance on the light
box after the last
adjustment?
No
Will you use the same
C12 light balancing
filteras for past
adjustment?
Yes
It is not necessary to create
the reference data.

6-2-2 List of Jigs and Tools for Adjustment

This list is the same as when creating reference data: Refer to "6-1-1 List of Jigs and Tools when
Creating Reference Data".
No
Does the "map04w" folder
No
exist on HDD of PC with
which you previously
performed adjustment?
Yes
Copy the "map04w" folder
from the PC with which you
performed adjustment.
No
Yes
No
Create the reference data
referring to section 6-1.
Fig. 6-2-1
6 - 11
No
Create the reference data
referring to section 6-1.