TESTO 340 Instruction Manual page 44

44 G. Measuring
3 .
OK
- The data are read from the automatic furnace. An update of the data takes place
every 30s at the latest, this is dependent on the automatic furnace.
Reading out current status data:
The current data are displayed when a connection to the automatic furnace exists. The
following data are displayed with the help of symbols:
Component Status ON
Air controller
Motor
Valve1
Valve 2
Printing data:
.
Print
Display identification data:
.
Info OK
Display failure statistic:
Failure statistic
Reading out failure store:
Automatic furnaces are equipped with circular buffer memories, i.e. failure reports are
overwritten when the failure store is full.. The last failure occurring is at position 1 in the
failure list.
.
Failure
Option:
Scroll through failure list:
Taking readings over into the menu Flue Gas:
The readings are not presented in the display, in the menu
with the readings from a flue gas measurement, stored in a measurement protocol or
transferred to a PC.
For taking data over into the menu
must not be active (grey background).
.
OK
- The Menu
Measurements
Status OFF
.
OK
, .
Flue Gas
is opened.
Component Status ON
Flame
Ignition
Oil prewarmer
Flue Gas
the function fields
Info
Status OFF
Symbol
not displayed
they can be stored
and
Failure statistic