Table of Contents
Advertisement
To maintain the operating licence and the
warranty validity, the performance of the
maintenance tasks must be documented. Any
faults identified during maintenance work must
be rectified and documented as such before
further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
28.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 37. The
inspection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
"more documents >>". In any event, keep all
documents / service reports as a means of
proof, and get any service work which was not
carried out by PRO ACTIV documented.
Please bring these operating instructions /
service booklet to every service.
29 Disposal & Recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your dealer
in a proper, environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
In the following section, you will find a
description of the materials for the disposal
and recycling of the product and its packaging:
Aluminium: frame, rims, leg rest, tube plugs
Steel: fixing points, quick-release / screwed
axle, screws, nuts
25
Operating instruction RAPTOR 4all & 4you
under the link
Plastic: handles, quick release lever, tube
plugs, tyres, bags for packing
Synthetic fibres and foam: padding, covers
Cardboard / paper: packaging
30 Re-use
If your product has been provided to you by
your funding provider and you no longer
require it, you should report this fact to your
health insurance company or your dealer. Your
product can then be simply and economically
re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV. In
addition to the instructions contained in chapter
27 (Cleaning and care), a thorough cleaning of
the grips and all controls must be carried out.
Before the product can be reused, it must be
prepared with care. A disinfection agent must
be sprayed onto all surfaces that the user may
make contact with. For this purpose, a liquid
disinfection agent based on alcohol must be
used for the quick residue-free disinfection
(e.g., Exporit 4712). Please observe the
manufacturers instructions for use for the
disinfection agent that you use. In general, a
complete disinfection cannot be guaranteed on
the seams. We therefore recommend that you
dispose of the seat upholstery.
This will also be done by PRO ACTIV as part
of the safety check. The safety-related check
must be initiated by the funding provider.
Moreover, in event of wear or due to
adaptation to the user groups, such as the seat
and back system, you can adapt or change
using the modular system.
Advertisement
Table of Contents
