Table of Contents
Advertisement
Operating instruction RAPTOR 4all & 4you
18 Seat system
The seat system generally comprises an open
belt system. The open belt system can be
subsequently adjusted. The slack of the
seating surface can be changed using fleece
hook-and-loop straps.
Figure 23: Open belt system with fleece hook-and-
loop straps for adjusting the slack
When adjusting the slack of the belt
system, take care that the slack does not
protrude beyond the lower edge of the frame.
Otherwise when overcoming obstacles, you
may get caught the belt system and your
bottom that may result in injury and damage to
the belt system. The product may not be
operated with damaged seating system.
It is mandatory to use a seat cushion on
the seating system. At cold temperatures, the
seat cushion prevents lower abdomens from
undercooling and protects against dirt and
wetness. Moreover, the seat cushion also
ensures for equal pressure distribution.
19 Neck rest
19.1 Neck rest height adjustment
The height adjustment of the neck rest is
carried out via the quick release lever on the
neck rest holding tube. For this purpose, open
the quick release lever and push the neck
support into the desired position. Then close
the quick release lever again.
Bottom quick release
lever closed
Figure 24: Quick release lever for adjusting the neck
rest height closed
Bottom quick release
lever opened
Figure 25: Quick release lever for adjusting the neck
rest height opened
After every adjustment, check that the
neck rest is firmly attached in its position. If
necessary the tension can be adjusted by
turning the quick release lever clockwise.
19.2 Neck rest angle adjustment
The angle adjustment of the neck rest is
carried out via the top quick release lever on
the neck rest holding tube. Open the quick
release lever and set the neck rest padding to
the desired angle. Then close the quick
release lever again.
Top quick
release lever
closed
Figure 26: Quick release lever for adjusting the neck
rest angle closed
16
Advertisement
Table of Contents
