Table of Contents
Advertisement
Operating instruction RAPTOR 4all & 4you
23.4 Decoupling the drive unit
To decouple the drive unit from the chassis,
place the chassis ont he chassis stand and
operate the parking brake.
Chassis stand
Figure 48: Chassis on the chassis stand
Then remove the securing cord from the lever
of the eccentric pin and turn the lever of the
eccentric pin clockwise by approx. 90°.
Securing cord
removed
Figure 49: Lever of the eccentric pin opened and
securing cord removed
Now the eccentric pin is removed from the
adapter plates.
Lever of the
eccentric pin opened
(turned downwards)
Ball lock pin
Figure 50: Eccentric pin removed from the adapter
plate
Lift the drive wheel a little, align the drive unit
so that it is straight ahead and in doing so, pull
out the ball lock pin with pressed orange
surface out of the adapter plates. In order to
remove the ball lock pin, press in the orange
surface on the handle of the ball lock pin.
Lift the drive
wheel
Figure 51: Eccentric and ball lock pin removed from
the adapter plate, chassis lowered to the ground
Now the drive unit can be removed.
Then the ball lock pin can be inserted into
one of the two adapter plates in order to
prevent the ball lock pin and eccentric pin from
being lost.
Now the drive unit is separated from the
chassis. This allows a favourable packing size
for transporting the product.
Orange
surface on
the handle
Eccentric pin
removed
Ball lock pin
pulled out
22
Advertisement
Table of Contents
