Pronto M50 Owner's Operator And Maintenance Manual page 74

SECTION 11—BATTERIES
NOTE: For this procedure, refer to FIGURE 11.6.
NOTE: The charger port located on the front of the joystick requires the use of an independent
charger. The independent charger is NOT supplied with the wheelchair.
1. Attach the battery charger connector to the charger port on the front of the joystick.
2. Plug the charger's AC power cord or extension into the grounded 110-volt wall outlet.
3. When charging is complete, turn charger off.
4. Disconnect output cable from joystick charger port.
Independent Charger Port
(Charger NOT supplied)
FIGURE 11.6 Charging Using An Independent Charger Plugged Into The Joystick
® ™ ™ ™ ™ 74
Pronto M50 , M51 and M61 with SureStep Part No. 1125085