SECTION 5—WHEELCHAIR OPERATION
To drive the wheelchair, perform the following:
1. Turn the power on. Refer to Turning the Power On/Off on page 28.
2. Adjust speed. Refer to Adjusting the Speed on page 30.
3. Maneuver the joystick in the following manner:
MOVEMENT
FORWARD
REVERSE
Turn RIGHT
Turn LEFT
STOP
M50 and M51 Wheelchairs
To Move Left
Joystick
To Move
Backward
FIGURE 5.3 Using the Joystick to Drive the Wheelchair
Adjusting the Speed
M50 and M51 Wheelchairs
NOTE: For this procedure, refer to FIGURE 5.4.
1. Turn the speed control knob to adjust
the speed:
• Clockwise - Increase speed.
• Counterclockwise - Decrease speed.
®
™
™
Pronto
M50
, M51
and M61
Push forward on the joystick.
Pull back on the joystick.
Move the joystick RIGHT.
Move the joystick LEFT.
Release the joystick and the wheelchair will quickly slow down.
To Move
Forward
To Move
Right
To Move Left
™
™
30
with SureStep
ACTION
To Move
M61 Wheelchairs
Forward
Speed
Control
Knob
FIGURE 5.4 M50 and M51 Wheelchairs -
M50 and M51 Wheelchairs
Joystick
To Move
Right
To Move
Backward
Part No. 1125085