Adjusting The Headrest (Semi-Recline Only) - Pronto M50 Owner's Operator And Maintenance Manual

SECTION 7—SEAT
Seat Hinge
Detail "A"
Locknut
105°
110°
100°
95°
Shoulder
Bolt
FIGURE 7.2 Adjusting the Back Angle - Fold Down Back Angle

Adjusting the Headrest (Semi-Recline Only)

NOTE: For this procedure, refer to FIGURE 7.3.
1. To raise the headrest, lift the headrest up to the desired position.
2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower
the headrest to the desired position.
Headrest
Release Tab
Headrest
Tube
FIGURE 7.3 Adjusting the Headrest (Semi-Recline Only)
43 ® ™ ™ ™ ™
Part No. 1125085 Pronto M50 , M51 and M61 with SureStep