Pronto M50 Owner's Operator And Maintenance Manual page 33

NOTE: For this procedure, refer to FIGURE 5.8.
NOTE: This procedure applies to M61 wheelchairs only.
1. Make sure the wheelchair is on a level surface.
2. Press the mode button to switch from driving mode to elevate mode.
NOTE: The LED will light up with a circle around it.
3. Move the joystick:
• Forward - Elevates the seat.
• Backward - Lowers the seat.
Elevated Seat
Part No. 1125085
SECTION 5—WHEELCHAIR OPERATION
FIGURE 5.8 Elevating the Seat
33
Selected
Drive
Mode
Joystick
® ™ ™
Pronto M50 , M51 and M61
Mode
Button
Elevate
the Seat
Lower
the Seat
™ ™
with SureStep