Setup Page; Input 1 Menu - Watlow 97 series User Manual

Setup Page

The setup page contains 8 menus.
Display Parameter
[`Set] Setup Page
Go to a setup menu.
[Inp1]

Input 1 Menu

[`set] Setup Page
[Sen1] Sensor Type 1
Sets the input
hardware type of
input 1.
[In`1] Input 1
Sets the input
linearization
parameter of the
input 1.
NOTE: For more information about how parameter settings affect the controller's operation, see Chapter Five, Features.
Wat l ow S e ri e s 9 7
Range Default
[InP1] Input 1 [InP1]
[Inp2] Input 2 (if
present)
[Out1] Output 1
[Out2] Output 2 (if
present)
[Out3] Output 3 (if
present)
[Out4] Output 4 (if
present)
[dISP] Display
[glbl] Global
[``tc] Thermocouple [``tc]
(0)
[`RTD] RTD (1)
If Sensor Type is set to If Sensor
thermocouple Type (Input
[```j] J (0) 1 Menu) is
[```H] K (1) changed to
[```T] T (2) thermocoup
[```e] E (3) le: [```j],
[```n] N (4) if Sensor
[```C] C (5) Type is
[```d] D (6) changed to
[`Pt2] PT2 (7) RTD:
[```r] R (8) [`din]
[```s] S (9)
[```b] B (10)
if Sensor Type is set to
RTD
[`din] RTD_DIN (11)
[`JIS] RTD_JIS (12)
Modbus Conditions for
Address Parameters to Appear
read/write
Active if Setup Page Lock
(Lockout Menu) is not set to
[hide].
600 r/w Active if Setup Page Lock
(Lockout Menu) is not set to
[hide].
601 r/w Active if Setup Page Lock
(Lockout Menu) is not set to
[hide].
P ar ame t e r s 6 . 7