Global Menu - Watlow 97 series User Manual

Display Parameter
[LdSP] Lower Display
Selects the value or
message that will
appear in the lower
display.
Limit Status or User
Limit Message, if
selected, will flash in
the lower display if
out of limit range.
[Lo`S] Lower Display
User Safe Message
Selects four
characters for user
message to appear
while the unit is in a
safe condition.
[Lo`L] Lower Display
User Limit
Message
Selects four
characters for the
user message to
appear while the
unit is in a limit
condition.
[glbl]

Global Menu

[`set] Setup Page
[`C-F] C or F
Selects the
temperature scale
for the input.
Converts all
temperature
parameters.
[`Err] Input Error
Latching
Selects input error
latching mode.
NOTE: For more information about how parameter settings affect the controller's operation, see Chapter Five, Features.
6 . 16 P a ra m e te r s
Range Default
[L`St] limit status [L`St]
(0):[SAFE]; [``hi];
[``lo]
[USEr] user message
(1)
[L`hi] high limit set
point (3)
[L`Lo] low limit set
point (2)
see Upper Display User [____]
Limit Message
see Upper Display User [____]
Limit Message
[``°C] Celsius (1) [``°F]
[``°F] Fahrenheit (0)
[`Lat] latching (0) [nLat]
[nLat] no latching (1)
Modbus Conditions for
Address Parameters to Appear
read/write
1405 r/w Active: Always.
1406 r/w Active if Lower Display [LdSP] is
1407 r/w set to [USEr].
1408 r/w
1409 r/w
characters
1 to 4
1410 r/w Active if Lower Display [LdSP] is
1411 r/w set to [USEr].
1412 r/w
1413 r/w
characters
1 to 4
901 r/w Active if Setup Page Lock
(Lockout Menu) is not set to
[hide].
607 r/w Active if Setup Page Lock
(Lockout Menu) is not set to
[hide].
Watl o w Se r i e s 9 7