Table of Contents
Advertisement
Setra offers a complete line of
HVAC Products
Model 264
For Static Duct and Flow
Measurement
Model 265
Smaller Size 10 PSI Overpressure
Model 230
Wet/Wet Differential Pressure
Measurement
Model 209
Rugged Low Cost Gauge Pressure
Measurement from 0-5 to 0-1000 PSIG
10.0 MODEL 267 DESICCANT COVER
The desiccant can be easily regenerated or replaced. When the desiccant has
absorbed all the moisture it can hold, the user is alerted through the clearly
visible desiccant status window, which changes from blue (dry) to pink
(saturated). (Note: Life expectancy of the desiccant is approximately six
months)
10.1 Regenerate the Desiccant
The desiccant can be regenerated by removing the cover from the base and
baking it in a conventional oven at 200°F for 3-4 hours or until it returns to its
dry status (blue).
10.2 Replacing the Desiccating Cover
To ensure the uninterrupted system operation, replacement covers with desic-
cant are available. Contact your local representative or Setra Systems' customer
service department at (800) 257-3872 to order.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the 267 and is the answer not in the manual?
Questions and answers