Tesla WALL CONNECTOR Installation Manual page 25

Green Yellow
Lights Light
Off Off
Off Off
Top light Off
on
Top light Off
on
Top light Off
on
Troubleshooting
Red Light Auto-Retry
5 flashes After 1
minute retry
(no limit on
retries)
6 flashes After 1
minute retry
(no limit on
retries)
1 flash No
2 flashes No
3 flashes No
Troubleshooting
What it Means What to Do
Over current
Reduce the vehicle's
protection.
charge current
setting. If the problem
persists and the
attached vehicle is
manufactured by
Tesla, contact Tesla. If
the problem persists
and If the attached
vehicle is not
manufactured by
Tesla, contact the
original manufacturer.
A communication If possible, plug the
error occurred vehicle into another
between the Wall Wall Connector or a
Connector and the Mobile Connector to
vehicle. determine if the
vehicle is able to
communicate with
other charging
equipment. Then
contact Tesla Service.
Over temperature Make sure the Wall
protection (latch- Connector, vehicle
off) connectors, and wall
plug (if used) are not
covered by anything
and there is no heat
source nearby. If the
problem persists in
normal ambient
temperatures (under
38°C), contact Tesla.
Non-Tesla vehicle Compatible input
attempting distributions are:
connection to non- single-phase
compatible input distribution or 400V,
distribution. three-phase
distribution.
Incorrect rotary Consult your
switch setting. electrician.
23