Step-by-Step Installation Instructions
Note: To ensure proper operation, verify
that neutral is connected to the neutral
line inside the circuit breaker box or the
main electrical panel.
5.
Tighten the terminal block to the
recommended torque:
•
1.5 N-m for the terminal block on the
top entry bracket.
•
1.2 N-m for the terminal block in the
main housing.
•
2.0 N-m for the ground terminal block
in the main housing.
6.
Check for miswiring using a multimeter
and verify that there are no shorts before
turning the upstream circuit breaker ON.
18