Residual Risks - Stanley SCD12 Instructions Manual

c. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool
bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
5. Battery tool use and care
a.
the manufacturer. A charger A charger that is
suitable for one type of battery pack may create a risk of
b.
designated battery packs. Use of any other
c. When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may cause burns
d. Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery
may cause irritation or burns.
6. Service
a.
repair person using only identical
replacement parts. This will ensure that the safety of
the power tool is maintained.
Additional safety warnings for drills
and impact drills
• Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
• Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Never use a chisel accessory in rotary mode.
•
The accessory will bind in the material and rotate the drill.
Use clamps or another practical way to secure and support
•
the workpiece to a stable platform. Holding the work by
hand or against your body leaves it unstable and may lead
to loss of control.
Before drilling into walls, floors or ceilings, check for the
•
location of wiring and pipes.
Avoid touching the tip of a drill bit just after drilling, as it
•
may be hot.
The intended use is described in this instruction manual.
•
The use of any accessory or attachment or performance
of any operation with this tool other than those recommen-
ded in this instruction manual may present a risk of
personal injury and/or damage to property.
Safety of others
This appliance is not intended for use by persons
•
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
•
play with the appliance.

Residual Risks

In spite of the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks
cannot be avoided.
These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot during
operation.
• Risk of personal injury due to prolonged use.
ENGLISH
5