Technical Data; Specification - Stanley SCD12 Instructions Manual

Technical data

SPECIFICATION

Voltage
No-load speed:
1st gear
2nd gear
Max torque
Power output (MWO)
Chuck capacity
Maximum drilling capacity:
Wood
Meta
CHARGER
Input Voltage
Output Voltage
Output Current(DC)
Approx. charge time
Battery
Voltage
Capacity
Type
LEVEL OF SOUND PRESSURE ACCORDING TO EN
60745:
Sound pressure (LpA) 65.0 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 76.0 dB(A), uncertainty (K) 3 dB(A)
VIBRATION TOTAL VALUES (TRIAX VECTOR SUM)
ACCORDING TO EN 60745:
Screwdriving (ah, S) 0.9 m/s
Drilling into metal (ah, D) 1.1m/s
SCD12
V
DC
min 0–400
-1
min 0–1500
-1
Nm
W
mm
mm
mm
SC121
V 220-240
AC
V
DC
A
min 70(1.5Ah)
SB12S
V
DC
Ah
Li-Ion
, uncertainty (K) 1.5 m/s
2 2
, uncertainty (K) 1.5 m/s
2
VIBRATION
The declared vibration emission values stated in the technical
10.8
data and the declaration of conformity have been measured
in accordance with a standard test method provided by EN
60745 and may be used for comparing one tool with another.
The declared vibration emission value may also be used in a
preliminary assessment of exposure.
26
180
WARNING! The vibration emission value during actual use of
10
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
20
increase above the level stated.
10
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
22
way the tool is used, including taking account of all parts of the
1.25
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
10.8
SERVICE INFORMATION
1.5
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
TWO YEARS WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
2
accordance with the instruction manual.
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at:
www.2helpU.com
ENGLISH
13