Important Safety Instructions For All Battery Chargers - Stanley SCD12 Instructions Manual

ENGLISH
LABELS ON TOOL
The label on your tool may include the following pictographs
along with the date code:
WARNING! To reduce the risk of injury, the user must read
the instruction manual.
Read instruction manual before use.
Always wear safety goggles.
Always wear safety hearing protection.
POSITION OF DATE CODE
The Date Code, which also includes the year of manufacture, is
printed into the housing.
Example:
2015
Year of manufacturing
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains
important safety and operating instruc tions for SC121 battery
chargers.
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.
WARNING: Shock hazard. Do not allow any
liquid to get inside charger. Electric shock may
result.
CAUTION: Burn hazard. To reduce the risk
of injury, charge only STANLEY rechargeable
batteries. Other types of batteries may burst
causing personal injury and damage.
CAUTION: Children should be supervised to
ensure that they do not play with the appliance.
NOTICE: Under certain conditions, with the
charger plugged in to the power supply, the
charger can be shorted by foreign material.
Foreign materials of a conductive nature such as,
but not limited to, grinding dust, metal chips, steel
wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger
cavities. Always unplug the charger from the
power supply when there is no battery pack in the
cavity. Unplug charger before attempting to clean.
• DO NOT attempt to charge the battery pack
with any chargers other than the ones in
this manual. The charger and battery pack are
specifically designed to work together.
• These chargers are not intended for
any uses other than charging STANLEY
rechargeable batteries. Any other uses may result
in risk of fire, electric shock or electrocution.
6
XX JN
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when
disconnecting charger. This will reduce risk of
damage to electric plug and cord.
• Make sure that cord is located so that it
will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
• Do not use an extension cord unless it is
absolutely necessary. Use of improper extension
cord could result in risk of fire, electric shock, or
electrocution.
• Do not place any object on top of charger
or place the charger on a soft surface that
might block the ventilation slots and result
in excessive internal heat. Place the charger in
a position away from any heat source. The charger is
ventilated through slots in the top and the bottom of the
housing.
• Do not operate charger with damaged cord
or plug — have them replaced immediately.
• Do not operate charger if it has received
a sharp blow, been dropped, or otherwise
damaged in any way. Take it to an authorised
service centre.
• Do not disassemble charger; take it to an
authorised service centre when service or
repair is required. Incorrect reassembly may result in
a risk of electric shock, electrocution or fire.
• In case of damaged power supply cord the supply cord
must be replaced immediately by the manufacturer, its
service agent or similar qualified person to prevent any
hazard.
• Disconnect the charger from the outlet
before attempting any cleaning. This will
reduce the risk of electric shock. Removing the
battery pack will not reduce this risk.
• NEVER attempt to connect 2 chargers together.
• The charger is designed to operate on
standard household electrical power. Do not
attempt to use it on any other voltage. This
does not apply to the vehicular charger.
Save these instructions
Chargers
The SC121 chargers accept 10.8V Li-Ion batteries.
These chargers require no adjustment and are designed to be
as easy as possible to operate.
Charging Procedure (Fig. B)