Installing The Appliance - Baumatic BYHI615 User Manual

I nstalling the appliance
o Cut a hole in
shown above.
the worktop that corresponds with the drawing
o IMPORTANT:
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob
opposite).
o IMPORTANT: Do not use a silicon sealant
to seal the appliance against the aperture.
This will make it difficult to remove the hob
from the aperture in fu
needs to be serviced.
24
There are
into position (see drawing
ture, particularly if it
ventilation