Table of Contents
Advertisement
Installing the appliance
o Cut a hole in the worktop that corresponds with the drawings
o IMPORTANT: You must have a gap of at least 25 mm between
o Carefully turn the hob upside down and place it on a cushioned
o Apply the sealing strip provided around the edge of the
o The protective covering must be removed from both sides.
o Do not leave a gap in the sealing agent or overlap the thickness.
o IMPORTANT: Do not use a silicon sealant to seal the appliance
Get user manuals:
See SafeManuals.com
shown above.
the underneath of the appliance and any surface that is below it.
mat.
appliance.
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
20
Advertisement
Table of Contents
