Table of Contents
Advertisement
o Carefully lower the hob into the aperture hole that you have cut
out.
o There are holes on the base of the hob that you can fix the two
brackets to.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E.
manufacturer's instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 30A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o The spur outlet must still be accessible even when your hob is
located in its operating position.
o Cable type: H05 RRF 3 core x 6 mm² (not supplied)
Regulations
and
25
o You should place the
bracket
on
underneath of the hob,
in a position that is
appropriate
for
aperture that you have
cut
out.
Using
screws provided, fix the
bracket
to
the
These screws MUST be
securely tightened.
in
compliance
the
the
the
hob.
with
Advertisement
Table of Contents
