Controls And Functions; Front Panel - bon BXM-170LS Operating Instructions Manual

3. Controls and Functions

3.1. Front Panel

②
① ⑤ ⑥
BXM Front Buttons
①
STANDBY
Power ON/OFF Button. This Button is operated after being pressed about 3 seconds.
② SDI 1, SDI 2 I NPUT SELECT :
This is for selecting SDI Input. Additional OSD LOGO is displayed.
③
CVBS 1, CVBS 2, YC I NPUT SELECT
This is for selecting CVBS1,2, Input and selecting YC Input. Each time user press this button, it
converts CVBS1,2, Y,C Mode.
④
SCAN
This Button is used to convert output picture status into Zero Scan, Under Scan, Over Scan, Zoom,
Pixel to Pixel Mode. Each time user press this button, it converts above Mode.. (SCAN LED is
ON when Over Scan.)
⑤
DVI / VGA I NPUT SELECT
This is for selecting DVI / VGA Input. Each time user press this button, it converts DVI, VGA Mode.
⑥
HDMI I NPUT SELECT
This is for Selecting HDMI input.
⑦
COMPONENT-YUV, RGB I NPUT SELECT
This is for selecting Components Input. Each time user press this button, it converts YPbPr, RGB
Mode.
⑧
W -FORM/ VECTOR(▼)
Input signal is shown as a format of Wave form or Vector Scope. Each time this button is pressed,
it converts each mode. (This mode is available only in follow mode => SDI, CVBS, S-Video,
YPbPr Mode)
③ ④ ⑨
⑦ ⑧
-- 9 --
Multi Format LCD Monitor
⑩ ⑫
⑪ ⑬
⑭