Photon Focus D/L-2048 User Manual page 53

AcquisitionMode
Continuous
Continuous
SingleFrame
SingleFrame
MultiFrame
MultiFrame
SingleFrameRecording
SingleFrameRecording
SingleFrameReadout
ContinuousRecording
ContinuousRecording
ContinousReadout
Table 5.8: AcquisitionMode and Trigger
5.2 Trigger and Strobe
TriggerMode After the command AcquisitionStart is executed:
Off Camera is in free-running mode. Acquisition can be
stopped by executing AcquisitionStop command.
On Camera is ready to accept triggers according to the
TriggerSource property. Acquisition and trigger
acceptance can be stopped by executing
AcquisitionStop command.
Off Camera acquires one frame and acquisition stops.
On Camera is ready to accept one trigger according to
the TriggerSource property. Acquisition and trigger
acceptance is stopped after one trigger has been
accepted.
Off Camera acquires n=AcquisitionFrameCount frames
and acquisition stops.
On Camera is ready to accept n=AcquisitionFrameCount
triggers according to the TriggerSource property.
Acquisition and trigger acceptance is stopped after
n triggers have been accepted.
Off Camera saves one image on the on-board memory
of the IP engine.
On Camera is ready to accept one trigger according to
the TriggerSource property. Trigger acceptance is
stopped after one trigger has been accepted and
image is saved on the on-board memory of the IP
engine.
don't care One image is acquired from the IP engine's
on-board memory. The image must have been
saved in the SingleFrameRecording mode.
Off Camera saves images on the on-board memory of
the IP engine until the memory is full.
On Camera is ready to accept triggers according to the
TriggerSource property. Images are saved on the
on-board memory of the IP engine until the
memory is full. The available memory is 24 MB.
don't care All Images that have been previously saved by the
ContinuousRecording mode are acquired from the IP
engine's on-board memory.
53