Photon Focus D/L-2048 User Manual page 47

Property
BinningHorizontal
BinningVertical
Binning_Bitshift
PixelFormat
SensorDigitizationTaps
Height
Width
Window_W
Table 5.5: Binning parameters
5.1 Reduction of Image Size
Type Description
Integer Number of pixels combined in binning in
horizontal direction.
Integer Number of pixels combined in binning in vertical
direction.
Integer Additional left bitshift after binning (overflow is
ignored)
Enumeration If BinningHorizontal or BinningVertical is set to a
value bigger than 1 then the Mono16 (16 bit) pixel
format is available (not available in DR1 models).
Note that this reduces the maximal frame rate.
Enumeration (not available in DR1 models) This property must
be set to One if PixelFormat=Mono16 and set to Two
otherwise.
Integer Height of the output image.
Integer Width of the output image. In DR1 models: value
of the property WidthInterface must be copied to
property Width.
Integer (applies only to DR1 models) This is the width of
the input image. E.g. Window_W=2048 and
BinningHorizontal=2 will result in a width of 1024
in the output image after demodulation.
47