Accumulated Total; Percentage Weighing; Animal (Dynamic) Weighing; User Parameters - Adam Equipment WARRIOR SERIES User Manual

EN

ACCUMULATED TOTAL

6.6
The scale can be set to accumulate manually by pressing the [Print/M+/Esc]
key, or automatically when a weight is removed from the scale. See full
version of the user manual for complete details.

PERCENTAGE WEIGHING

6.7
The scale can be set to perform percentage weighing. See full version of the
user manual for complete details.
ANIMAL (D
6.8
The scale can be set to animal (dynamic) weighing for weighing any items
that are unstable or may move. See full version of the user manual for
complete details.

7.0 USER PARAMETERS

Pressing the [Func/C] key during normal operation allows the user to access
the parameters for customizing the scale. The parameters are split into 4
groups-
1. Check weighing parameters,
2. Percentage and Animal Weighing Functions
3. RS-232 parameters
4. Scale parameters
• When [Func/C] is pressed the display will first show "FunC 1" for
Check weighing parameters.
• Press either the [Func/C] key or the [Pcs/ ] to advance through
the groups "FunC 1", "FunC 2" , "FunC 3" and "FunC 4". When the required
function is displayed, press [
setting desired parameters for this function.
• When in one of the sections press [Print/M+/Esc] to regress one
step each time. If you press [Print/M+/Esc] repeatedly, you will exit
the User Parameter section and return to normal weighing.
Complete details of all parameters can be found in of the full version of the
user manual.
© Adam Equipment Company 2014
) WEIGHING
YNAMIC
0/T  ] to enter the sub-menu for
 
1 1
(P.N. 3136611622 - Revision D, Apr 2014)