Alcatel SP-R5200 Operations & Installation Manual page 97

HOW TO CHECK S/W VERSION & PIN NUMBER IN TEST MODE
S/W VERSION CHECK
Baseset
1. At first,handset should be registered to test Baseset before checking s/w version.
2. When handset is in TEST MODE, press down key, and you can see Òbase gainÓ
3. In base gain menu, press O.K key.
4. You can see the ÒAddr-Ó display, then enter 0013 and O.K key.
5. Handset display like that ÒdATA-0530Ó.
0530 means base s/w version is 5.30
Handset
registered state
1. In TEST MODE, you can see ÒRF TESTÓ
2. Press O.K key.
3. You can see the handset s/w version during 1 second. (like Ver 7_0)
unregistered state
1. In power off state, Power On and press 0 within 2 seconds.
2. You can see the handset s/w version during 500msec.
HANDSET PIN CHECK
After user has changed defalut pin number, and he forgot its PIN number.
User have no method to find its PIN Number. But You can check the changed user PIN number in test mode
1. Enter the test mode. and press up key twice.
2. You can see the View Pin menu.
3. Press OK
4. You can see the changed PIN number.
Notice :
DonÕt Touch any menu in test mode except I described menu.
You can make fatal error, if you touch another menu.
Test Jig Usage 9-2