Call Log - Alcatel SP-R5200 Operations & Installation Manual

4. Press button.
Result: The number is automatically dialed.
2-20-4 To Erase All Numbers In Memory
If you reset the handset, all numbers stored in memory are erased. Refer to ÔResetÕ on page 2-32.

2-21 Call Log

When you receive a call, the callerÕs phone number is shown on your phoneÕs display if it is available from the
network on which the call was made. The last 10 numbers received are stored in your phone and you can view
the list and dial the numbers.
2-21-1 To View and Dial the Numbers
1. Press or button repeatedly until
2. Press button.
OK
Result: The LCD window shows the last callerÕs number, and the date and time when the call was received if
the information has been transmitted from the network with the callerÕs number. If there is no
number received,
3. Scroll through the memory and choose the desired number by using
4. Press button to dial the selected number.
Notes:
¥ Your phone stores up to 20 digits for each callerÕs number. If there are hidden digits not displayed, the former
part scrolls to the left and the latter part of the number appears.
¥ The last number is stored in the memory cell Ô0Õ. When a new call is received, the previous number is shifted
to the next cell Ô1Õ, allowing the new number to be stored in this position. The oldest number is automatically
erased.
2-21-2 To Erase All Numbers Received
1. Press or button repeatedly until
2. Press button.
OK
Result: You hear a beep and the phone returns to the Standby mode.
2-19
appears.
is displayed.
appears.
or button.
Operations & Installation