Alcatel SP-R5200 Operations & Installation Manual page 101

EXECUTION DISPLAY
F 1 : ID READ
READ ID: 000EC00010
F1:ID READ
F 3 : ID WRITE
WRITE ID: 000EC00020
WRITTEN ID: 000EC00020
F1:ID READ
You must enter full 10digits.
First 5 digits are fixed EMC Code which is granted by ETSI.
(000EC,00198,00199,0019A,0019B)
Valid input value in Last 5 digits :
Baseset : 00000(8)~FFFF0(8), Last digit always must be 0 or 8.
Handset : 00000~FFFFF
Test Jig Usage
SR - R5200(DECT) BASESET v4.8
EEPROM WRITIONG
X-TAL ADJUSTING
F3:ID WRITE F5:NAT OPT
SR - R5200(DECT) BASESET v4.8
EEPROM WRITING
X-TAL ADJUSTING
F3:ID WRITE F5:NAT OPT
RESULT
F7:CLK ADJ
BASE ID is Written
RESULT
F7:CLK ADJ
Test Mode is O K!
F9:RF ALT+X:EXIT
Test Mode is O K!
F9:RF ALT+X:EXIT
9-6