Mounting The Vc-2402 - Planet VC24024 Quick Installaion Manual

Step 4: Connect Console cable to COM port of a computer. Then run the terminal
program with the setting shown below:
Console Setting
Users can also access the DSLAM via Ethernet. By default the out-band IP address
of the DSLAM is obtained via DHCP. Users can also set the IP address manually
by using the CLI commands or Web Configuration Tool (refer to section 1.3). It's
possible to access the DSLAM with telnet on port 23.

1.2.3 Mounting the VC-2402

The position and orientation of the brackets depends on the rack used for
mounting. The DSLAM can be front-mounted in a standard channel rack (5-inch
projection); and it can be shipped with the mounting brackets installed in one of
three mounting positions or shipped loose.
The mounting brackets can be rotated for use in wall mounting. Optional adhesive
feet may be attached to the bottom of the chassis so that it can be placed on a
desk or other smooth surface.
STANDARD
FRONT MOUNT
MOUNTING
MOUNTING
BRACKET
BRACKET
FRONT
Mounting Bracket Orientation (Top View)