Controls And Led Indication - Planet VC24024 Quick Installaion Manual

2.3 Controls and LED Indication

The VC-2402 has simple controls and indicators on its front panel. The indicators
show the current operating states of various system elements and serve as
maintenance aids for local technicians at each site. The remaining controls on the
cards are also provided for local system testing and maintenance.
In general there are following LED modes:
OFF: The LED is not powered.
ON: The LED is powered up constantly.
BLINK: Alternating between OFF and ON.
Fast-BLINK: Blinking at estimated frequency of 650 ms per on/off cycle
Slow-BLINK: Blinking at estimated frequency of 2700 ms per on/off cycle
SCAN: The LEDs ON/OFF in sequence.
VC-2402 Controls and LED Indication
LED
SFP1 - LINK
SFP2 - LINK
SFP1- ACT
SFP2- ACT
GBE1- Speed
GBE2- Speed
(LED B on RJ-45)
GBE1-Link/Act
GBE2-Link/Act
(LED A on RJ-45)
MGMT- Speed
(LED B on RJ-45)
VC-2402 Front Panel
Color
Green - On
Off
Green - Blink
Off
Orange
Off
Green - On
Off
Green - Blink
Orange
Off
Indication / Condition
Valid network connection established
Disconnection
Transmitting or receiving data
Disconnection
100 / 1000 Mbps
10 Mbps
Valid network connection established
Inactive
Transmitting or receiving data
100 Mbps
10 Mbps
2