Configuration Import/Export - Planet VC24024 Quick Installaion Manual

1.4 Configuration Import/Export
The configuration database of VC-2402 contains two kinds of database - inband
database and general database. Inband database contains configuration for the
inband channel and is shared by two boot images (no matter which boot point you
choose, the inband configuration keeps the same). General database contains other
configuration.
The VC-2402 provides the configuration preservation feature that the configuration
database is stored in flash memory (two partitions available). In addition to the
configuration preservation feature, the VC-2402 also provides the configuration
export/import feature.
The following paragraph describes how to do the configuration DB export/import in
CLI and Web.
In CLI:
(A) Save runtime config. and set to new active DB:
Ex:
enable
configure
runningcfg save [<inbandBackup Name>] [<generalBackup Name>]
/*Backup Name is optional. When inband Backup Name is specified, general Backup Name
is also optional. If omitted, use the same name as <inbandBackupName>*/
(B) Choose another DB / (C) Choose another DB and restart: (total 16 DB
for selection)
Ex:
enable
configure
runningcfg restore index <inbandBackupIndex> [<generalBackupIndex>][noreboot]
or
runningcfg restore name <inbandBackupName> [<generalBackupName>][noreboot]
/*You must add the word "noreboot" for action (B) so that the system will not reboot auto-
matically once the DB is changed*/
(D) Clear active DB including inband / (E) Clear active DB including inband
and restart:
Ex:
enable
configure
runningcfg clear all [noreboot]
/*You must add the word "noreboot" for action (D) so that the system will not reboot auto-
matically once the DB is cleared*/
21