Din-Rail Mounting - Planet Switch User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
BSP-360
2.2.2

DIN-rail Mounting

This section describes how to install the Renewable Energy Switch. There are two methods to install the
Renewable Energy Switch -- DIN-rail mounting and wall-mount plate mounting. Please follow the steps below.
Follow all the DIN-rail installation steps as shown in the example.
Step 1: Screw the DIN-rail on the Renewable Energy Switch.
Step 2: Lightly slide the DIN-rail into the track.
Step 3: Check whether the DIN-rail is tightly on the track.
Please refer to the following steps to remove the Renewable Energy Switch from the track.
29