Table of Contents
Advertisement
After the site requirements have been verified, the chassis may be installed at the
specified location. When mounting the chassis, practice good safety habits. Use
two or more people to secure the chassis. Relay rack mounting normally requires
at least two people.
Step
Locate the chassis and obtain the appropriate chassis mounting
1
hardware.
Determine and obtain the tools required for the chassis mounting
2
hardware.
From the front of the relay rack, position the chassis in its relay rack
3
mounting location.
Using the appropriate rack mounting hardware, secure the chassis in its
4
relay location on both left and right side of mounting bracket.
The chassis should be empty during the chassis mounting proce-
dures. Remove any unit in the chassis, and store them according to
static-sensitive device storage procedures.
Note
Hazardous voltages may exist on the chassis. Always practice good
safety habits when wiring a live circuit or performing maintenance.
Warning
For 23'' Rack
For 19'' Rack
Mounting Bracket Position for Standard Mount (VC-2402-48 shown)
Action
Advertisement
Table of Contents
