Connecting The Gbe1/Gbe2 Trunk Interface - Planet VC24024 Quick Installaion Manual

1.2.6 Connecting the GBE1/GBE2 trunk interface

The system provides two types of trunk interfaces (two ports for each type):
electrical (RJ-45) and optical (mini-GBIC) interfaces. When both electrical and
optical ports are connected, system will automatically select the interface according
to the priority setting (Fiber first or Copper first).
RJ-45 Electrical Trunk Interface
The pin assignment of RJ-45 connector on the trunk port is shown in the following
figure and table.
Prepare a proper SFP module and install it into the optical trunk port. Then you can
connect fiber optics cabling that uses LC connectors or SC connectors (with the use
of an optional SC-to-LC adapter) to the fiber optics connector on the trunk port.
Fiber optics cable with LC duplex connector
Please observe the proper connecting terminals for transmitting
cable to TX LC-type receptacle, and receiving cable to RX LC-type
receptacle on the front panel.
Note
Mini-GBIC (SFP) Trunk Interface
Connect the optical fiber to the SFP socket
Connecting optical fiber to the trunk port
1,2 T/Rx+,T/Rx-
3,6 T/Rx+,T/Rx-
4,5 T/Rx+,T/Rx-
7,8 T/Rx+,T/Rx-
1