Chapter 2 Hardware Installation; Front Panel - Planet FGSW-2402RS Manual

This section is describes the hardware features and installation of the Switch, 16/24-port
10/100Mbps + 2 Gigabit-slot Ethernet Smart Switch.

2.1 Front Panel

The font panel of the Switch consist one RS-232 console port, LED indicators, 24/16
10/100Base-TX RJ45 ports and two expansion- slots. The module that can apply to the
slots includes:
_ MII-SX - 1000Base-SX Gigabit Ethernet Module (SC, MM)
_ MII-LX - 1000Base-LX Gigabit Ethernet Module (SC, SM/MM)
_ MII-GT - 10/100/1000Mbps Ethernet Module (RJ-45 copper)
_ MII-ST – 100Base-FX Fast Ethernet Module (ST, MM)
_ MII-SC* - 100Base-FX Fast Ethernet Module (SC, MM)
* Different distance available upon request.
For the open slot, please refer to the MII module's installation guide for the hardware
installation. The front panel of the switch is as blow.
Figure 2-1 The Font Panel of FGSW-2402RS (top), and FGSW-1602RS (bottom)
LED Indication of the Switch
LED Statu
Green
Power
Off
LNK/
Green
ACT
100 Orange
HARDWARE INSTALLATION
Descript
Power On
Power is not connected
This indicator light green when the port is connected to an
Ethernet or Fast Ethernet station, if the indicator is blink-
ing green, it will be transmitting or receiving data on the
network.
This LED indicator light orange when a Fast Ethernet sta-
tion is connected. It remains OFF, if an Ethernet station is
connected.
Chapter 2
5