Planet FGSW-2402RS Manual page 16

Please refer to the tables below:
Link status of the device using Auto-negotiation to the Switch
Switch's Device mode setting
Speed Adver-
1000M Full
tise setting
1000M Full* 1000 Full
100M Full 100M Full
100M Half 100M Half
10M Full 10M Full
10M Half 10M Half
Link status of the device using Forced / non auto-negotiation to the Switch
The Switch's
Device mode setting
Speed Adver-
1000M Full
tise setting
1000M Full* NC
100M Full NC
100M Half NC
10M Full NC
10M Half NC

NOTE:
3.4.2 Trunking
In this function, user is able to enable or disable Trunking at each group. (8/6 trunks
group base on ports)
14
100M Full
100M Full
100M Full
100M Half
10M Full
10M Half
100M Full
100 Half
100M Half
100M Half
NC
NC
1. Fields with grey color is recommended setting in the
Switch.
2. NC means no communication.
3. 1000M Full setting can be found only in port 25/26 of
FGSW-2402RS and port 17/18 of FGSW-1602RS.
4. Though device with forced full-duplex mode build the link
with the Switch, the performance could be bad due to the
devices runs in Full while the Switch runs in Half-duplex.
100M Half 10M Full
100M Half 10M Full
100M Half 10M Full
100M Half 10M Full
10M Full 10M Full
10M Half 10M Half
100M Half 10M Full
100 Half 10 Half
100M Half 10M Half
100M Half 10M Half
NC 10M Half
NC 10M Half
10M Half
10M Half
10M Half
10M Half
10M Half
10M Half
10M Half
10 Half
10M Half
10M Half
10M Half
10M Half