Planet FGSW-2402RS Manual page 21

Setup an 802.1Q VLAN:
Follow from Step 1 to Step 3 above
4. Press Space key to change to 802.1Q mode
5. Use L key move to the right hand side
6. Move to VLAN ID then Press Enter to add VLAN ID
7. Move to the Port Press Space key to add VLAN group
8. After complete the configuration Press Enter to Update VLAN
9. Press S to save the configuration
After the setup of port's VLAN above, the Switch will base on global VLAN setting
(section 3.4.6) and VLAN tag priority insertion (section 3.4.5) and the VLAN setting here
to filter/forward the packets to each switching port. Please also consult your network
administrator for the detailed VLAN plan of the network.
19