Hardware Installation - Planet BSP-360 Quick Installation Manual

4. Hardware Installation

The following section describes the hardware installation of the BSP-360. Before
connecting any network device to the BSP-360, read this chapter carefully.
CAM1
PoE
N
Outdoor Media Converter/
Wireless AP DC Powered Device
Please follow the following steps to install the system:
Step 1. Installing BSP-360
Place the BSP-360 in a desired location using the wall-mount or Din-rail fixtures.
a. Please install the BSP-360 in a proper enclosure or shelter.
b. The BSP-360 must be grounded.
Note
10
CAM2 CAM3
PoE PoE
PoE
DC
1000
N
DC
Battery
DC
DC
BSP-360
Ethernet Switch
Monitoring Center
2.4GHz 802.11n 1000BASE-T UTP
1000BASE-T UTP with PoE
PoE
Power Line (DC) 1000BASE-SX/LX Fiber Optic
1000
Solar PV