Planet FGSW-2402RS Manual page 20

802.1Q VLAN tag
aware
Ingress Rule for
Acceptable frame
types
Ingress Rule for
Ingress filtering

Notice:
3.4.7 VLAN Member Setup
This menu is for user to add VLAN member to each port. The Switch supports up to 32
VLAN groups for port-based VLAN and 802.1q tag VLAN.
1. Press number 7 from Configuration menu for VLAN Member setup
2. Press E to change to edit mode
3. Press A to add VLAN
Setup a PORT based VLAN:
4. Press Space key to change to port-base VLAN
5. Use L key move to the Port (VLAN member)
6. Press Space key to add VLAN group
7 After complete the configuration Press Enter to Update VLAN
8. Press S to save the configuration
18
Enable 802.1Q VLAN tag. Default: disable
To permit all frames or VLAN-tagged frames only. De-
fault: Admin all frames
Enable filter the frame received from a port which port
is not in the classified VLAN group member. Default:
disable
Ingress rule only for 802.1Q VLAN mode