Planet FGSW-2402RS Manual page 19

Be noted, the switch support dual priority per port, the QoS setting will base on the menu
above to arrange each port's high/low priority.
3.4.5 Priority tag Insert/Remove
In this menu, user is able to insert or remove Priority tag each port. The option includes:
Insert Tag (high priority only), Insert Tag (all frame), Remove Tag and Don't Touch.
Please also refer to VLAN section 3.4.6 and 3.4.7 for more.
Insert Tag
(high priority only):
Insert Tag
(all frame):
Remove Tag:
Don't touch:
3.4.6 VLAN Global Control
This menu is allow user to enable VLAN's global capabilities including, VLAN function,
Unicast packet Inter-VLAN Leaky, ARP broadcast packet Inter-VLAN Leaky, IP Multicast
packet Inter-VLAN Leaky, 802.1Q VLAN tag aware, Ingress Rule for Acceptable frame type
and Ingress Rule for Ingress Filtering.
VLAN function
Unicast packet
Inter-VLAN Leaky
ARP broadcast
packet Inter-VLAN
Leaky
IP Multicast packet
Inter-VLAN Leaky
Insert priority tag into the untagged high-priority frame
Insert priority tag into the all untagged frame
Remove the VLAN tag from all tagged frame
The default setting, which means no modify
Enable VLAN, Default disable
Enable the packet to be forward to a destination port at
different VLAN. Default: disable
Enable ARP frame to broadcast to all switch port
Default: disable
Enable multicast to be flood to all the multicast group
member. Default: disable
17