Time Display & Sntp Commands - D-Link DWL-7700AP Command Line Interface Reference Manual

Command:
timeofday Displays the Current Time of Day
Get Command
get sntpserver Display SNTP/NTP Server IP Address
get tzone Display Time Zone Setting
Set Command
set sntpserver Set SNTP/NTP Server IP Address
set tzone Set Time Zone Setting
802.11 a/b/g Access Point Command Line Interface Manual
Function
Function
Function
22
11
T D & SNTP C
IME ISPLAY
Syntax
timeofday
Note: Need to set up SNTP/NTP server firstly
Syntax
get sntpserver
get tzone
Syntax
set sntpserver <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set tzone [0=GMT]
OMMANDS