Technical Data - REMS Power-Press E Instruction Manual

eng
● Comply with maintenance instructions and instructions on tool replacements.
● Check mains lead of power tool regularly and have it replaced by a qualified
expert or an authorised REMS after-sales service facility in case of damage.
Check extension cable regularly and replace it when damaged.
Intended use
WARNING
Use REMS radial presses only for the intended purpose of making press joints of
all common pressfitting systems.
Use REMS cropping tongs only for the intended purpose of cropping threaded bars
up to the strength class 4.8 (400 N/mm²).
Use REMS cable shears only for the intended purpose of cropping electric cables
≤ 300 mm² (Ø 30 mm).
Use REMS axial presses only fort he intended purpose of making compression
sleeve joints and for expanding pipes of all common compression sleeve systems.
Only use REMS pipe expanders for the intended purpose of expanding and calibrating
pipes.
All other uses are not for the intended purpose and are prohibited.
Explanation of symbols
Read the operating instructions before use
Power tool complies with protection class I
Power tool complies with protection class II
The tool is not suitable for using outdoors
Environmentally friendly disposal

1. Technical Data

1.1. Article numbers
REMS Power-Press E drive unit
REMS Power-Press drive unit
REMS Power-Press ACC drive unit
REMS Mini-Press ACC drive unit Li-Ion
REMS Akku-Press drive unit Li-Ion
REMS Akku-Press ACC drive unit Li-Ion
REMS Ax-Press 15 drive unit Li-Ion
REMS Ax-Press 25 ACC drive unit Li-Ion
REMS Ax-Press 25 L ACC drive unit Li-Ion
REMS Ax-Press 40 drive unit Li-Ion
REMS Akku-Ex-Press Cu ACC drive unit Li-Ion
REMS Akku-Ex-Press P ACC drive unit Li-Ion
REMS Akku-Ex-Press Q & E ACC drive unit Li-Ion
REMS Power-Ex-Press Q & E ACC drive unit
Expanding device 6 – 40 mm, ½ – 1½"
Expanding device 54 – 63 mm, 2"
REMS battery Li-Ion 14.4 V, 1.3 Ah
REMS battery Li-Ion 14.4 V 2.2 Ah
REMS voltage supply Li-Ion
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W
Sheet steel case, REMS Power-Press E
Sheet steel case, REMS Power-Press
Sheet steel case, REMS Power-Press ACC
Sheet steel case, REMS Mini-Press ACC
Sheet steel case, REMS Akku-Press / REMS Akku-Press ACC
Sheet steel case, REMS Ax-Press 15 and 40
Sheet steel case, REMS Akku-Ex-Press Q & E
Sheet steel case, REMS Ax-Press 25 ACC and Ax-Press 25 L ACC 573284
Sheet steel case, REMS Akku-Ex-Press Cu ACC
Sheet steel case, REMS Akku-Ex-Press P ACC
Sheet steel case, Combi Set REMS Ax-Press 25 ACC
and Akku-Ex-Press P ACC
1.2. Capacity
REMS Mini-Press ACC Radial press for making press joints in all
standard press fitting systems on steel pipes, stainless steel
pipes, copper pipes, plastic pipes, composite pipes
Radial presses REMS Power-Press and REMS Akku-Press for
making press joints in all standard press fitting systems
on steel pipes, stainless steel pipes, copper pipes,
plastic pipes, composite pipes
Axial presses for making compression sleeve joints (sliding
sleeve joints) on stainless steel pipes, steel pipes, copper
pipes, plastic pipes, composite pipes and for expanding
plastic pipes, composite pipes
REMS Akku-Ex-Press Q & E ACC for expanding of
pipes/coil for the system Uponor Quick & Easy
REMS Power-Ex-Press Q & E ACC for expanding of
pipes/coil for the System Uponor Quick & Easy
REMS Akku-Ex-Press Cu ACC for expanding and
calibrating pipes
REMS Akku-Ex-Press P ACC for expanding pipes
Operating temperature range
REMS cordless tools
Mains operated presses
1.3. Thrust / pressing power
Thrust of radial presses
Pressing power of radial presses
Thrust of radial press Mini
Pressing power of radial press Mini
Pressing power REMS Ax-Press 15
Pressing power REMS Ax-Press 40
Pressing power REMS Ax-Press 25 ACC
Pressing power REMS Ax-Press 25 L ACC
Pressing power REMS Akku-Ex-Press Cu ACC
Pressing power REMS Akku-Ex-Press P ACC
REMS Akku-Ex-Press Q & E ACC
REMS Power-Ex-Press Q & E ACC
1.4. Electric Data
REMS Power-Press E,
REMS Power-Press,
REMS Power-Press ACC,
REMS Power-Ex-Press Q & E ACC
REMS Akku-Press, Akku-Press ACC
Ax-Press 15/40
REMS Akku-Ex-Press Q & E,
REMS Mini-Press ACC,
REMS Ax-Press 25 ACC / 25 L ACC,
REMS Akku-Ex-Press Cu ACC,
REMS Akku-Ex-Press P ACC
572100
577001
Rapid charger
577000
Li-Ion/Ni-Cd (1h)
578001
571003
571004
573002
573003
Voltage supply 230 V
573004
573006
1.5. Dimensions
575006
REMS Power-Press E
575008
REMS Power-Press,
575005
575007 REMS Power-Press ACC
575100 REMS Mini-Press ACC
575101 REMS Akku-Press / Akku-Press ACC
571540 REMS Ax-Press 15/40
571550 REMS Akku-Ex-Press Q & E ACC
571565 REMS Power-Ex-Press Q & E ACC
571560 REMS Ax-Press 25 ACC
570280 REMS Ax-Press 25 L ACC
570280 REMS Akku-Ex-Press Cu ACC
570280 REMS Akku-Ex-Press P ACC
578290
1.6. Weights
571290
REMS Power-Press E drive unit
573282
REMS Power-Press drive unit
578290
REMS Power-Press ACC drive unit
REMS Mini-Press ACC drive unit without battery
573284
REMS Akku-Press / Akku-Press ACC drive unit
573284
without battery
REMS Ax-Press 15 drive unit without battery
573284
REMS Ax-Press 40 drive unit without battery
REMS Akku-Ex-Press Q & E ACC drive unit without batt. 2.0 kg
REMS Power-Ex-Press Q & E ACC drive unit without batt. 5.6 kg
REMS Ax-Press 25 ACC drive unit without battery
REMS Ax-Press 25 L ACC drive unit without battery
Ø 10 – 40 mm
REMS Akku-Ex-Press Cu ACC drive unit without battery
REMS Akku-Ex-Press P ACC drive unit without battery
REMS battery Li-Ion 14.4 V, 1.3 Ah
REMS battery Li-Ion 14.4 V, 2.2 Ah
Ø 10 – 108 mm
Pressing tongs (average)
Pressing tongs Mini (average)
Pressing heads (pair, average)
Expanding head (average)
Ø 12 – 40 mm
Adapter tong Z2
Adapter tong Z4
Ø 16 – 40 mm Adapter tong Z5
Ø ⅜ – 1½" Pressing ring M54 (PR-3S)
Pressing ring U75 (PR-3B)
Ø 16 – 63 mm
Ø ½ – 2"
Ø 12 – 40 mm
– 8°C – +60°C
230 V 1~; 50 – 60 Hz; 450 W; 1,8 A
110 V 1~; 50 – 60 Hz; 450 W
S3 15% (AB 2/10 min)
all-insulated (73/23/EWG)
interference-suppressed (89/326/EWG)
14.4 V =; 2.2 Ah; 20 A
14.4 V =; 1.3 Ah; 18 A
14.4 V =; 2.2 Ah; 20 A
Input 230 V~; 50 – 60 Hz; 65 W
10.8 – 18 V – ---
Output
Input 100 – 120 V~; 50 – 60 Hz; 65 W
10.8 – 18 V – ---
Output
Input 230 V~; 50 – 60 Hz
14.4 V – ---; 6 A – 33 A
Output
430×110×85 mm (16.9"×4.3"×3.3")
365×235×85 mm (14.4"×9.2"×3.3")
288×260×80 mm (11.3"×10.2"×3.1")
338×290×85 mm (13.3"×11.4"×3.3")
330×320×85 mm (13"×12.6"×3.3")
290×260×80 mm (11,4"×10,2"×3,1")
420×245×81 mm (16,5"×9,6"×3,2")
295×260×80 mm (11,6"×10,2"×3,3")
325×260×80 mm (12,8"×10,2"×3,1")
265×260×80 mm (10,4"×10,2"×3,1")
275×260×80 mm (10,8"×10,2"×3,1")
4.4 kg
4.6 kg
4.6 kg
2.1 kg
3.8 kg
4.6 kg
5.4 kg
2.6 kg
2.8 kg
2.3 kg
2.0 kg
0.3 kg
0.5 kg
1.8 kg
1.2 kg
0.3 kg
0.2 kg
2.0 kg
3.6 kg
3.8 kg
3.1 kg
2.7 kg
eng
Ø 8 – 42 mm
Ø ⅜ – 1¾"
0°C – +60°C
32 kN
100 kN
22 kN
70 kN
17 kN
30 kN
20 kN
13 kN
20 kN
20 kN
20 kN
34 kN
(9.6 lb)
(10.0 lb)
(10.0 lb)
(4.5 lb)
(8.3 lb)
(10.0 lb)
(11.8 lb)
(4.4 lb)
(12.2 lb)
(5.6 lb)
(6.1 lb)
(5.0 lb)
(4.3 lb)
(0.6 lb)
(1.1 lb)
(3.9 lb)
(2.6 lb)
(0.6 lb)
(0.4 lb)
(4.8 lb)
(7.8 lb)
(8.2 lb)
(6.7 lb)
(5.9 lb)