Port Forwarding - Pakedge RE-1 User Manual

Port Forwarding

Port forwarding allows services inside the network to be available from the Internet. For example, if you
have an IP camera on your network port forwarding would allow you to remotely view the camera.
To configure port forwarding:
1. Navigate to Network >Port Forwarding/1:1 NAT.
2. As an example, we will forward TCP port 80 to an IP camera on the IP address 192.168.1.50. Click
Add New Item.
3. For the Description enter IP Camera. For the Protocol select TCP. For the WAN Zone select
WAN. We will enter 80 for the External Port. Enter 80 as the Internal port. For the internal IP
address select custom and enter 192.168.1.50. Leave the enable box checked. Click Apply. The
Port forward information will be saved in this section.