Pakedge RE-1 User Manual page 30

7. The Service column has a list of common applications that you may want to prioritize. If the
application you are looking for is on the list you can select it as the service to prioritize.
8. The Protocol column allows you to select whether the data that you are prioritizing is TCP or UDP.
If you are unsure you can simply select all which will use both.
9. The Ports column allows you to select which ports the data you are prioritizing uses. Click the drop
down menu and select custom.
10. You can then fill in the port number that your application uses.
11. For example, we will prioritize the data of a computer on the network. For the priority select High.
Enter 192.168.1.34 as the IP address of the computer for the source host. For the destination
host select all, this will ensure that the policy will apply no matter what destination on the Internet
the computer goes to. For service select all, protocol will also be set to all. This means the policy
will apply to TCP and UDP data. Ports is also set to all.