Pakedge RE-1 User Manual page 29

You can restrict download and upload speeds on this page. For example, in the following image we
have set 25 Mbps as the limit for download and 10 Mbps as the limit for upload speeds. This
setting will apply to all devices on the network.
3. If you want to create a new QoS policy to prioritize certain data, click Add New Item.
4. The Priority column allows you to select the priority of the data
5. The Source host column allows you to define which source IP address the policy will apply to. If
you select all, the policy will apply to all devices on the network. If your device is listed in the drop
down menu you can select it, otherwise select custom and manually enter the IP address.
6. The Destination host column allows you to define which IP destination address the policy will
apply to. If you select all then the policy will apply to any IP address on the Internet.