Pakedge RE-1 User Manual page 39

9. Click Add New Item in the bottom box.
10. Enter a name in the description field.
11. For the Clients/Devices, hit the drop down menu and you will see a list of devices that the router
has discovered on the network. If the device you want to apply to this policy to is listed, you can
select it here. Otherwise, click custom and then you will be able to manually enter the IP address of
the device.
12. The Protocol field allows you to select whether you want to block TCP, UDP or both for this policy.
13. The Ports field allows you to specify which port you wish to block from going out to the Internet.
For example, you can type in port 80 and that would deny any traffic that is using that port from
going out to the Internet.
14. You can also apply a schedule to this policy. You can set the start time and stop time. You can also
select which days you wish the policy to apply on. Click Apply towards the bottom to finalize the
settings.